HSI® Single Leg Chain Sling | 1/2" Length | 18" Length | Grab Hook to Slip Hook Ends | 15,000 lb Working Load Limit
Grade 100 alloy chain slings can be used in the most extreme of conditions as well as in harsh environments without the worry of UV-ray degradation or chemical exposure that other rigging solutions may present. HSI® chain slings offer versatility along with the strength to handle large lifting loads making it a great choice for industrial projects.
Easy to inspect and repair, chain slings are a long service life option tough enough to do the job for years to come. There are numerous configurations available for various attachment points, load sizes and overhead lifting circumstances. HSI® chain slings will conform to the specific usage required to complete your rigging job safely.
HSI® slings are assembled in an ISO 9001:2015 certified facility where quality, safety and efficiency are priority. Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.Chain Sling Details:
- Sling Legs: Single
- Chain Link Diameter: 1/2 in
- Chain Link Diameter: 13 mm
- Chain Length: 18 ft
- Working Load Limit: 15,000 lb
- Diameter: 1 in
- Inside Width: 3-1/2 in
- Inside Length: 7 in
- ROUGH AND READY – HSI chain slings are known for their ability to withstand a variety of tough conditions. A great lifting option when the rigging job calls for an application that can handle heat, filthy conditions, exposure to chemicals or extended outdoor use under UV rays.
- GRAB HOOKS TO SLIP HOOK END - The shallow aspect of the grab hook is atop the sling with the slip hook responsible for the load connection. A safety latch is included for an additional level of lift security.
- GRADE 100 ALLOY – Most commonly used for overhead lifting applications due to its excellent energy absorption properties and strength to weight ratio. The material’s hardness makes it the logical choice when looking for durability in comparison to other grades that can wear quickly on the inner portion of the link.
- DOUBLE TAGGED FOR SAFETY - Two tags are used on HSI slings to identify WLL (Working Load Limits). Riggers can reference critical information for safe sling application and OSHA compliance.
- AMERICAN MADE RIGGING - Hanes Supply, Inc. is proud to be the industry-leading USA based manufacturer of hoisting solutions for industrial construction and building projects since 1930. All slings are manufactured in a certified ISO 9001: 2015 facility.
|Manufacturer Part Number||10SGS1/2-18|
|Manufacturer||Hanes Supply Inc.|
|Chain Size (in)||1/2|
|End Fitting||Grab Hook and Slip Hook|
|Master Link Nominal Diameter (in)||1|
|Master Link Inside Width (in)||3.5|
|Master Link Inside Length (in)||7|