CM® TTG7500 TTG Horizontal Girder Clamp, 1,650 lb to 16,500 lb Working Load Limit, 0 in to 1-3/4 in Plate

TTG clamps are designed to lift and transport structural steel beams in the horizontal position.

• Designed to lift and transport structural steel beams in the horizontal position
• Fitted with a Camlok spring-operated safety lock and is operated by pulling the lock upwards
• For short beams, a single clamp can be used. Long beams should be lifted using 2 clamps attached to opposite beam flanges
• Maximum hardness of material to lift should not exceed 300 Brinell (32HRC)
• Design factor 4:1