CM® THS750 THS Plate Clamp, 90 lb to 1,600 lb Working Load Limit, 0 in to 3/4 in Jaw Capacity

THS plate clamps can be used with single or two leg slings with a maximum angle of 60°. The clamps are designed to be used on structural steel plates up to a surface hardness of 300 Brinell (32HRC), providing the plate can withstand the forces imposed.

• Spring/lever-operated mechanism securely locks the clamp onto the horizontally positioned plate
• Do not use to lift stainless steel, lead or copper
• Can be used in single or 2 leg slings
• Use lifting beams for longer plates
• Clamp locks quickly onto the plate, enabling a single operator to set up the plate for lifting
• Lifts and handles single sheet steel plates in the horizontal position
• Useful for loading plates into guillotines, presses, punching machines and folding presses
• Caution should be used so that maximum sling angle of 60° is not exceeded
• Design factor 4:1