CM® HG500 HG High Grip Plate Clamp, 100 lb to 1,100 lb Working Load Limit, 0 in to 3/8 in Jaw Capacity

HG high grip clamps are designed to give additional grip forces to products during lifting. The high grip has an additional lever in the clamping mechanism thus asserting a higher gripping force on the plate being lifted.

• Can be used on hot rolled structural steel plates
• Can be used to lift stainless steel plates or plates with hardened surfaces due to cold rolling
• Smaller jaw range makes these clamps more efficient for lifting thinner steel
• Suitable for hardness up to 371 Brinell (40HRC)
• Can be used for lifting and turning plates from the horizontal to vertical position or vice versa, through 180°
• Clamp has serrated teeth and will mark plate
• Standard clamp is fitted with a hook ring but can be alternatively supplied with a short length of chain
• Design factor 4:1