Klein® D2139NECRINS Insulated Cutting Crimping Pliers, 2-Layer, Hardened Steel, 0.78 in Knife, 1.37 in Jaw Capacity, 9 in

KLEIN TOOLS

SKU

D2139NECRINS-11611

UPC #092644700477

Manufacturer #D2139NECRINS

Be the first to review this product

$89.80

Quantity Break Pricing may apply in the cart

Availability:

Call for availability

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

These Klein Tools 9 in Insulated Side-Cutting Crimping Pliers offer protection against electric shock up to 1000 volts. The pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1,000V rating symbol. The pliers offer maximum strength with their forged-steel construction and a crimping die helps provide increased leverage.

Features

Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1,000V rating symbol
Two layers of insulation provide protection against electric shock while the integral guards help prevent hand contact with conductive parts
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
A flame retardant, impact-resistant, bright orange outer coating
High-leverage design provides 46% greater cutting and gripping power than other plier designs
Precision machined knives cut cleanly and crisply even on fine stranded wire, mule tape and pull line
Integral guards help prevent hand contact with conductive parts
Hot-Riveted
New England
Jaw Width: 1.25 in
Jaw Length: 1.91 in
Handle Length: 5.73 in
Jaw Thickness: 0.62 in

Specs

More Information
Manufacturer Part Number	D2139NECRINS
Manufacturer	Klein Tools
Brand Name	KLEIN TOOLS
UPC	092644700477
Length (in)	9.6250
Standard Approvals	IEC 60900 ASTM F1505
Warnings	Only use tools that are marked with the official international 1,000V rating symbol shown above, if there is any chance that the tools will make contact with an energized source Whenever possible, always de-energize lines and equipment prior to working on or around them; Klein Tools insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source Do not touch uninsulated portion of the tool or any conductive object when either might contact an energized source Wear approved eye protection; always inspect your tools before use; do not use if orange coating cracks, breaks or becomes damaged; destroy tool if white layer shows through orange layer Always inspect your tools before use; destroy tool if insulation becomes damaged in any way Because moisture, films, or other surface contaminants are conductive, Klein Tools insulated tools must be kept clean, dry, and free of any surface contaminants

Reviews

Write Your Own Review