Klein® D203-6-INS Insulated Long Nose Pliers, 2-Layer, Hot-Riveted, Hardened Steel, 0.572 in Knife, 1.72 in Jaw Capacity, 6 in

KLEIN TOOLS

SKU

D203-6-INS-11611

UPC #092644710179

Manufacturer #D203-6-INS

Be the first to review this product

$49.99

Quantity Break Pricing may apply in the cart

Availability:

Call for availability

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Klein Tools Insulated Long Nose Side-Cutting pliers are 1,000V rated for safety on the job. The long nose is designed for grabbing and looping wire. Dual layer, orange-over-white insulation provides a warning sign that insulation may be compromised. The molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2012 standards for insulated tools. Cutting knives are induction hardened for long life.

Features

Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1,000V rating symbol
Flame retardant, impact-resistant, bright orange outer coating with two layers of insulation provide protection against electric shock
Slim head design for working in confined areas
Curved handles provide greater tool control
Side-cutting knives at the hinge
Knurled jaws for sure wrapping and looping
Hot-riveted joint ensures smooth action and no handle wobble
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
Jaw Width: 0.688 in
Jaw Length: 1.969 in
Jaw Thickness: 0.375 in
Point Diameter: 0.094 in
Handle Length: 3.97 in

Specs

More Information
Manufacturer Part Number	D203-6-INS
Manufacturer	Klein Tools
Brand Name	KLEIN TOOLS
UPC	092644710179
Length (in)	6.8750
Standard Approvals	IEC 60900 ASTM F1505
Warnings	Only use tools that are marked with the official international 1,000V rating symbol shown above, if there is any chance that the tools will make contact with an energized source Whenever possible, always de-energize lines and equipment prior to working on or around them; Klein Tools insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source Do not touch uninsulated portion of the tool or any conductive object when either might contact an energized source Always wear approved eye protection Always inspect your tools before use; destroy tool if insulation becomes damaged in any way Because moisture, films, or other surface contaminants are conductive, Klein Tools insulated tools must be kept clean, dry, and free of any surface contaminants

Reviews

Write Your Own Review