Klein® 646716INS Insulated Nut Driver, Non-Magnetic, Steel, SAE, 7/16 in, 6 in Shaft

KLEIN TOOLS

SKU

646716INS-11611

UPC #092644652301

Manufacturer #646716INS

Be the first to review this product

$23.80

Quantity Break Pricing may apply in the cart

Availability:

Call for availability

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Protect yourself when working near an energized source with Klein's insulated hollow-shaft nut driver. Clearly marked with the official 1,000V rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. The full hollow-shaft permits turning nuts on long screws.

Features

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1,000V rating symbol
Two layers of insulation provide protection against electric shock
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool and a flame retardant, impact-resistant, bright orange outer coating
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
Tip-Ident quickly identifies nut driver size
Cushion-Grip™ handles for greater torque and comfort

Specs

More Information
Manufacturer Part Number	646716INS
Manufacturer	Klein Tools
Brand Name	KLEIN TOOLS
UPC	092644652301
Length (in)	10.3130
Standard Approvals	IEC 60900 ASTM F1505
Measurement System	SAE
Warnings	Only use tools that are marked with the official international 1,000V rating symbol shown above, if there is any chance that the tools will make contact with an energized source Whenever possible, always de-energize lines and equipment prior to working on or around them; Klein Tools insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source Do not touch uninsulated portion of the tool or any conductive object when either might contact an energized source Wear approved eye protection; always inspect your tools before use; do not use if orange coating cracks, breaks or becomes damaged; destroy tool if white layer shows through orange layer Because moisture, films and other surface contaminants are conductive, Klein Tools insulated tools must be kept clean, dry and free of any surface contamination Always inspect your tools before use; destroy tool if insulation becomes damaged in any way

Reviews

Write Your Own Review