Enerpac® V2000 Sequence Valve, 250 in³/min Maximum Oil Flow, Oil ports 1/8 in - 27 NPT

Sequence valves block the oil to a secondary hydraulic circuit until pressure in the primary circuit reaches a preset level. The sequence valves have a built-in check system to allow the oil to flow back without external piping. Pressure settings for the V2000 can be adjusted by screwing the slotted pin in or out. The pressure settings for the other models is adjusted by loosening the jam nut and turn the set screw to reach your setting. Direct accurate pressure setting. Pressure setting between 200-2000 psi for secondary circuit. Flag indicator appears everytime the valve is operated. Oil ports 1/8 in - 27 NPT.