Dixon® Hose Cable, Series: King Cable™, 1/8 in Nominal, 20-1/4 in Length, 200 psi Working, Carbon Steel, Galvanized, Domestic
Features
King cable is the low cost answer to eliminate injuries caused by broken air hose connection
King safety cable reaches across the hose fittings to provide standby safety for hose
Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose
Thoroughly tested with years of service, a positive safeguard for air hose connection - helps you meet today's safety standards
Highly resistant to rust and corrosion
Galvanized carbon steel wire rope
Aluminum ferrule
Galvanized carbon steel spring
1/2 - 1-1/4 in ID hose
Cables are shipped with safety restraint labels attached
King safety cable must be installed in the extended position (no slack)
The Canada occupational safety and health regulations part XIII, 13:6b states: "Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose"
When hose, couplings or clamps fail or there is an accidental separation of the assembly, king safety cables minimize damage to equipment and injuries to operators