Dixon® Cam and Groove Adapter, Type E, Series: Boss-Lock™, Adapter, 2 in Nominal, Male Adapter x Hose Shank, 5-3/64 in Length, 250 psi, 316 Stainless Steel, Domestic
Features
The largest advantages of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting
After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule
Produced to interchange with all product produced to Commercial item Description A-A-59326D
Use with notched ferrules
Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Dixon stems and ferrules are specifically designed to be used together as a coupling system
Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon products
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70° F with a standard Buna-N seal installed
Contact Dixon for swage or crimp recommendations
You must purchase a fitting and the matching ferrule to create an assembly
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm