Dixon® Cam and Groove Coupler, Series: EZ Boss-Lock™, Coupling Fitting/Connector, 4 in Nominal, Coupler x Class 150 Flange End Style, 6-19/32 in Length, 100 psi Pressure, 316 Stainless Steel, Domestic
Features
11 in open across cam arm
No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged, no sliding pins to jam or pop open
Extremely easy to open, the release lever is under your thumb when you want to open the fitting, ergonomic
Resistant to accidental disconnection when dragged
The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm
Rotating action helps keep the locking devise free of debris
Designed to protect critical parts from impact and to withstand rugged use
Flanges are designed to mate with 150 lb flange
Produced to interchange with all product produced to commercial item description A-A-59326D
If the rotating lever is not flush with the handle, it is not properly engaged
Produced as a welded fabrication construction
Flange has raised face
Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Under no circumstances should the EZ boss-lock cam arms be used on any fitting not specifically designed for their use
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed