FREE SHIPPING ON ALL ORDERS OVER $250
CM® M849AP Anchor Shackle, 2.6 ton Load, 7/16 in, 1/2 in dia Bolt/Nut/Cotter Pin, Orange Powder Coated
SKU
FIT30397
Manufacturer #M849AP
$25.12
$25.12
Quantity Break Pricing may apply in the cart
Availability:
Call for availability
Description
CM® Anchor Shackle, 2.6 ton, 7/16 in, 1/2 in Pin dia, Bolt/Nut/Cotter Pin, 1.69 in Inner Length, 1.19 in Inner Width, 0.72 in Opening, 1.15 in Eye Outer Size, Alloy Steel Body, Alloy Steel Pin, Orange Powder Coated. CM® Alloy Shackles are Designed with a 5:1 Design Factor and Have a Strength Rating Approximately 50% Higher Than a Comparable Sized Carbon Shackle and About 25% Stronger Than Super Strong Shackles. Anchor Shackles Can Be Side Loaded or Used For Multiple Connections.
Features
- 3/8 to 2 in sizes made in the USA from domestic (USA) Special Bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
- 2-1/2 to 3-1/2 in sizes forged form high quality German alloy steel at our STB facility in Hamm, Germany and then finished in the USA
- Shackles show major deformation before failure
- CM® shackles are forged to shape rather than bent like the competition, this allows for better shackle identification markings and dimensional consistency
- Working load limit and traceability codes shown as permanent markings on body
- All shackles have alloy quenched and tempered pins
- Shackles meet dimensional and performance requirements of RR-C-271
Specs
| Manufacturer Part Number | M849AP |
|---|---|
| Manufacturer | Columbus McKinnon Corporation |
| Brands | CM |
| Standard Approvals |
|
| Working Load Limit (ton) | 2.6 |
| Finish | Orange Powder Coated |
| Shackle Size | 7/16 in |
| Eye Outer Size (in) | 1.15 |
| Opening Size | 0.72 in |
| Inner Width | 1.19 in |
| Inner Length | 1.69 in |
| Pin Diameter | 1/2 in |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review