Simpson Strong-Tie® Strong-Rod™ AT-XP13 AT-XP® High Strength Acrylic Adhesive, 12.5 oz Side-By-Side Cartridge, Liquid/Paste Form

SKU

AT-XP13-12864

UPC #707392472407

Manufacturer #AT-XP13

Be the first to review this product

$48.60

Quantity Break Pricing may apply in the cart

Availability:

Call for availability

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Simpson Strong-Tie® Strong-Rod Acrylic Adhesive, High Strength, series: AT-XP®, Side-By-Side Cartridge, 12.5 oz, Acrylic Glass Base, Composition: (Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, qtz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide, Liquid/Paste, 24 hr Curing, Teal/Tan/White, 1.58 Specific Gravity, >200/159° F Flash, 0.417361111111111 Mixing, 30 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry. Formulated for high-strength Anchorage of Threaded Rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP® Adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-Installation identification.

Features

Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
10:1 two-component high strength, acrylic-based anchoring adhesive
Easy hole cleaning procedure no power-brushing required
For best results store between 14 to 80° F
Cures in substrate temperatures as low as 14° F in 24 hrs or less
Threaded rod anchoring and rebar doweling into concrete and masonry
Suitable for horizontal, vertical and overhead applications
Surfaces to receive adhesive must be clean
Base material temperature must be 14° F or above at the time of installation
For best results, material should be 14 to 80° F at time of application
To warm cold material, store cartridges in a warm, uniformly heated area or storage container
Do not immerse cartridges in water to facilitate warming
Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70° F and above
Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
Modification or improper use of mixing nozzle may impair AT-XP® adhesive performance
12 months shelf life from date of manufacture in unopened container
Compatible with ADT813S dispensing tool/AMN19Q mixing nozzle

Specs

More Information
Manufacturer Part Number	AT-XP13
Manufacturer	Simpson Strong-Tie
Brand Name	SIMPSON STRONG-TIE
UPC	707392472407
Series	AT-XP®
Package Quantity	1/Each

Reviews

Write Your Own Review