FREE SHIPPING ON ALL ORDERS OVER $250
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
Dixon® 48P1LJ15 Holedall® External Swage Floating Flange, 3 in ID x 3-30/64 to 3-40/64 in OD, Carbon Steel, Domestic
SKU
48P1LJ15-10639
Manufacturer #48P1LJ15
$327.28
$327.28
Quantity Break Pricing may apply in the cart
Availability:
In stock
Description
Dixon® Floating Flange, External Swage, Series: Holedall®, 3 in ID x 3-30/64 to 3-40/64 in OD Nominal, 1-3/16 in Thickness, Carbon Steel, 10-3/8 in, Domestic
Features
- 150 lb ASA flange drilling
- The Holedall coupling provides long-lasting efficiency and safety
- The coupling system requires no bolts and results in a clean coupling with no protrusions
- Carbon steel stem length, ferrule and flange
- Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system
- Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
- Do not use a wrench or vice on ferrule
- Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
- Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
- Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
- Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
- The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
- Media being transported through the hose should be compatible with the stem material
- Compatibility of ferrule material with the environment in which it will be used is recommended
- For applications other than the ones list, please consult Dixon
- Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
Specs
| Manufacturer Part Number | 48P1LJ15 |
|---|---|
| Manufacturer | Dixon Valve & Coupling |
| Brands | DIXON |
| Width (in) | 10.375 |
| Type | External Swage |
| Domestic/Import | Domestic |
| Material | Carbon Steel |
| Outside Diameter | 3-30/64 to 3-40/64 in |
| Inside Diameter | 3 in |
| Thickness | 1.1875 in |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review